View source for RegisterPassword

{{DISPLAYTITLE:registerPassword}}
==Usage==

This message is used between a MSC and a VLR  and between the VLR and the HLR if a mobile subscriber requests to register a new password. The VLR relays the message to the HLR.

==Addressing==
...

==Invoke parameters==

* '''ss-Code''' – the code of the supplementary service  for which the password should be registered.

==Result parameters==

The result contains the following parameter:

* '''newPassword''' – the password which was just registered by the subscriber in the network.

==Example==

 <component remoteCID="1" type="Invoke" operationCode="registerPassword">
       <ss-Code>plmn-specificSS-D</ss-Code>
 </component>

==References==

* ETSI TS 100 974 V7.15.0 (2004-03) p1081